The controllable electric solution

The Electrastream system is available in two models, the 125 has a 125 litre capacity and the 150 with a 150 litre capacity. Both models use Tri-Core heater technology with a combined output of 3 x 3 kW.

Technical Information	125	150
Capacity	125 litres	150 litres
Weight empty	13kg	14kg
Weight full	138kg	164kg
Coil rating	20.5 kW	26.7 kW
Coil surface area	0.75 M2	0.90 M2
Reheat time (Delta T=50°c)	50 minutes	58 minutes
Power	9 kW	9 kW
Voltage	240 V	240 V
Maximum temperature	70°c	70°c
Heat loss at 60°c in 24h	1.70 kWh	1.90 kWh
Titanium heater length	40cm	40cm

Dimensions	125	150
Height	995	1155
Diameter	505	505
a	650	790
b	755	915
c	995	1155
d	625	765
e	505	505
f	265	265
y	225	225

Electrastream Plus

The Electrastream Plus system is supplied with a cold water storage.

The accumulator has an internal controlled butyl diaphragm, incoming cold water is stored within this diaphragm at mains pressure. The air space between the diaphragm and the accumulator case is pressurised, this balances the supply and maintains pressure to the unvented hot water cylinder and cold outlets.

When hot and cold water outlets are turned on, the stored water from the accumulator supplements water from the incoming main, this results in consistent pressure and flow to all taps, showers and baths even when outlets are used simultaneously. Pressure will be sustained for as long as the accumulator is holding sufficient volume of water.

Accumulator Technical Information	125	150
Accumulator 200 (plus only)	100 litres	100 litres
Weight empty	30.4kg	30.4kg
Weight full	140kg	140kg

Standard Assessment Procedure (SAP)

SAP Data	Electrastream 125	Electrastream 150
Heat Loss	1.70Kwh in 24 hours @ 60 degrees	1.90Kwh in 24 hours @ 60 degrees
Reheat Time	Reheat time to 60 degrees = 50 minutes	Reheat time to 60 degrees = 58 minutes